// do something here » .NET

2010 Central Ohio Day of .NET

BP — Sat, 05 Jun 2010 23:48:56 +0000

A co-w0rker and I attended the Central Ohio Day of .NET on June 5, 2010. There was quite a bit of good content at the conference, which is a real tribute to the organizers, volunteers, and presenters.

The highlights of my day were sitting in on Matt Casto’s regular expressions talk, Phil Japikse’s M-V-VM primer, discussing the etymology of the MongoDB project with Sam Corder (I still say it was named such after the character in Blazing Saddles), Michael Eaton’s talk on WPF, and Parag Joshi’s demonstration of XNA/Windows Phone 7 game development.

VB.NET Printing For Dummies

BP — Wed, 17 Mar 2010 01:02:18 +0000

In order to send stuff to the printer in VB.NET, it is not quite as simple as dealing with the Printer object as in VB6. There are a couple of extra steps involved. Here is what I found, along with some helper methods that you might find useful.

On the form you want to print from, pull up the Toolbox and add a PrintDocument, a PrintDialog, and a Button, set the Document property of the PrintDialog to point to the PrintDocument you just created, and in the button’s Click event, insert the following code:

    Private Sub butPrint_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles butPrint.Click
 
        If PrintDialog1.ShowDialog() = Windows.Forms.DialogResult.OK Then
            PrintDocument1.DefaultPageSettings.Landscape = True
            PrintDocument1.Print()
        End If
 
    End Sub
 
    Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
 
        PrintTestPage(e.Graphics, PrintDocument1)
 
    End Sub

The Print method call in the button click event then fires the PrintDocument PrintPage event. Notice that I have set the default page settings to landscape. Don’t forget to wire the PrintDialog Document property to your PrintDocument, otherwise if you change the printer to print to in the print dialog, the document will still go to the default printer.

The PrintTestPage method is just something simple that I put together to make sure that the coordinates and justifications are all working fine. Here is that code:

    Sub PrintTestPage(ByVal g As System.Drawing.Graphics, ByVal doc As PrintDocument)
 
        Dim x, y As Integer
 
        For x = 0 To 100 Step 10
            For y = 0 To 100 Step 10
                PrintAtLocationWithColor(g, doc, x.ToString + ", " + y.ToString, x, y, _
                                         If(x = 0, "L", If(x = 100, "R", "C")), If(y = 0, "T", If(y = 100, "B", "C")), _
                                         "Arial", 8, True, Brushes.Red)
            Next
        Next
 
        PrintRectangle(g, doc, 0, 0, 100, 100)
        PrintRectangle(g, doc, 10, 10, 80, 80)
        PrintRectangle(g, doc, 20, 20, 60, 60)
        PrintRectangle(g, doc, 30, 30, 40, 40)
        PrintRectangle(g, doc, 40, 40, 20, 20)
 
    End Sub

The two methods called here, PrintAtLocationWithColor and PrintRectangle, are shown here:

    Sub PrintAtLocationWithColor(ByVal pg As Graphics, ByVal pd As PrintDocument, ByVal s As String, _
                                ByVal xPosition As Single, ByVal yPosition As Single, _
                                ByVal justification As String, ByVal verticalJustification As String, _
                                ByVal fontFace As String, ByVal fontSize As Single, _
                                ByVal fontBold As Boolean, ByVal theColor As Brush)
 
        Dim w, h As Single
        Dim x, y As Single
        Dim f As Font
        Dim sty As FontStyle
 
        sty = FontStyle.Regular
        If fontBold Then sty = sty + FontStyle.Bold
        If fontSize < 1 Then fontSize = 8.0
        f = New Font(fontFace, fontSize, sty)
 
        If pd.DefaultPageSettings.Landscape Then
            x = xPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
            y = yPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
        Else
            x = xPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
            y = yPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
        End If
 
        w = pg.MeasureString(s, f).Width
        h = pg.MeasureString(s, f).Height
 
        If Left(UCase(justification), 1) = "C" Then
            x = x - w / 2
        End If
        If Left(UCase(justification), 1) = "R" Then
            x = x - w
        End If
 
        If Left(UCase(verticalJustification), 1) = "C" Then
            y = y - h / 2
        End If
        If Left(UCase(verticalJustification), 1) = "B" Then
            y = y - h
        End If
 
        pg.DrawString(s, f, theColor, x, y)
 
    End Sub
 
    Sub PrintRectangle(ByVal pg As Graphics, ByVal pd As PrintDocument, ByVal xPosition As Single, ByVal yPosition As Single, _
                                ByVal width As Single, ByVal height As Single)
 
        Dim w, h As Single
        Dim x, y As Single
 
        If pd.DefaultPageSettings.Landscape Then
            x = xPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
            y = yPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
            w = width / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
            h = height / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
        Else
            x = xPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
            y = yPosition / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
            w = width / 100 * (pd.DefaultPageSettings.PrintableArea.Width)
            h = height / 100 * (pd.DefaultPageSettings.PrintableArea.Height)
        End If
 
        pg.DrawRectangle(Pens.Black, x, y, w, h)
 
    End Sub

All of the positioning and size parameters of these methods are percentages across and down the page, which I find much easier to deal with than absolute or printer specific positioning. This makes it dead simple to scale the reports to any page size I want to use.

.NET Kombat (Format vs. ToString)

BP — Wed, 24 Feb 2010 03:43:51 +0000

In converting some legacy VB6 code to VB.NET, I noticed that there was a lot of use of the Format function in the code to convert numbers to strings. This makes sense as Format was pretty much the only game in town in VB6.

However, in .NET, they introduced a handy-dandy .ToString() method that, on the surface, seems to do much the same thing as the Format function. I have been able to use them pretty much interchangeably with the desired results coming out every time.

I started to wonder which way was faster. Since I am a big proponent of empirical knowledge instead of just trying to get the theoretical story behind the two ways to do this, I rolled together this quick VB.NET console application:

Imports System.Text
 
Module Module1
 
    Sub Main()
 
        Dim i As Integer
        Dim r As Random = New Random()
        Dim t As Double
 
        System.Console.WriteLine("10,000,000 Formats")
        Dim sb1 As New stringbuilder
        t = Timer
        For i = 1 To 10000000
            sb1.Append(Format(r.NextDouble * 100.0, "###0.00 "))
        Next
        System.Console.WriteLine("Seconds elapsed: " + (Timer - t).ToString("#######0.00"))
        System.Console.WriteLine("Length of string builder: " + sb1.Length.ToString())
        System.Console.WriteLine()
 
        System.Console.WriteLine("10,000,000 ToStrings")
        Dim sb2 As New StringBuilder
        t = Timer
        For i = 1 To 10000000
            sb2.Append((r.NextDouble * 100.0).ToString("###0.00 "))
        Next
        System.Console.WriteLine("Seconds elapsed: " + (Timer - t).ToString("#######0.00"))
        System.Console.WriteLine("Length of string builder: " + sb2.Length.ToString())
        System.Console.WriteLine()
 
        System.Console.WriteLine("Press any key to end the program ")
        System.Console.ReadKey()
 
    End Sub
 
End Module

And here are the results:

As you can see, the ToString method is about 15% faster when doing 10 million calls with random numbers.

Oh, and by the way, Happy Pancake Day.

Easy way to format the time difference between two dates

BP — Wed, 27 Jan 2010 18:56:36 +0000

In converting my VB6 code over to VB.NET, I was looking for an easy way to take the different between two DateTime items and display in hours and minutes. The TimeSpan gives a nice structure to dive into the difference and see exactly the interval, but I was hoping to find a way to output this in the same way that you can use the ToShortTimeString method of DateTime.

As it turns out, I found a posting by Jay Barlow that mentions converting the time different to a date time, and then using a custom format string to do the work so that I wouldn’t have to. Here is my new VB.NET code, where rec is a class that includes the start and end date and duration is a string that holds the information to be displayed:

If rec.endDate IsNot Nothing Then
    Dim ts As TimeSpan = CDate(rec.endDate).Subtract(rec.startDate)
    Dim dt As DateTime = DateTime.MinValue.Add(ts)
    duration = "Event duration: " + dt.ToString("H:mm")
End If

Oh, and one more thing. Am I the only one in the world that thinks that iPad is the worst product name in history? Sure, it is so close to iPod so as to create brand recognition and draw comparisons, but I would just wonder what kind of names were shot down, and if any of them did not begin with the letter i.

By the way, Happy (Belated) Australia Day.

VB.NET radio button groups act differently than VB6 radio button groups

BP — Sat, 09 Jan 2010 03:18:42 +0000

The few dozen remaining WinForms developers left on this planet may have noticed that, for some reason, a group box with radio buttons in it as designed in the Visual Studio 2008 environment will have the first radio button of the first group box automatically selected when the form comes up, even though all of the radio buttons have their Checked property set to false in the design environment. It never used to do this in VB6, as when you ran the application, the group of radio buttons would have no members selected.

The problem manifests itself when you are trying to perform additional tasks in the CheckedChanged event of the radio buttons when the user selects one of the radio buttons, since the first radio button is being automatically selected.

I asked this question on Stack Overflow, and got a couple of replies. The one that I finally used to solve the problem was to set the Checked property of the radio buttons to false in the form’s Shown event, which I had never used before. By doing this, the first radio button was no longer automatically showing up checked.

One other thing that I had to do in addition was to cast the sender into a RadioButton and look at the Checked property of the clicked radio button in the CheckedChanged event, as that event is fired for radio buttons both being turned on and also turned off.

Oh, and happy National English Toffee Day!

Control arrays in VB.NET

BP — Tue, 29 Dec 2009 00:57:54 +0000

One of the things that I really liked (and used quite a bit) in the VB6 IDE was the ability to use the design surface to create a form with a bunch of controls with the same name as a control array. You would create the controls on the design page, give it the same name as another control, and the Index property would automatically be incremented. This would then let me use a loop to manipulate and examine these controls.

This functionality is missing in VB.NET, as I discovered when I tried to do my first .NET Compact Framework application way back when Visual Studio 2003 was shiny and new, and has continued to be missing from the feature set in VS2005 and VS2008.

Microsoft is not much help on this front. Their solution is to create the forms in code, as described in this article:

Not so helpful link

But I like using the design surface to create forms. A co-worker suggested we try to do a test in C# and tamper with the designer.cs file to create an array of controls in there, which worked OK. The big problems there were that the controls showed up on the design surface, but they could not be clicked and modified. Also, when we added a control to the form and saved it, all of the customizations we made to the designer file disappeared. (Oops.)

So instead, what I am now doing is creating my forms in the designer as before, with each control of the set having a different name with a number after it (such as cboName0, cboName1, etc.), referring to the index of the control in the array. At the top of the form’s class I have the arrays defined:

Dim cboName(10) as ComboBox
Dim lblNumber(10) as Label

Then, in the form load event, I am calling this subroutine:

Sub SetUpControlArrays()
 
    For Each cb In Me.Controls.OfType(Of ComboBox)()
        If cb.Name.Contains("cboName") Then
            cboName(CInt(cb.Name.Replace("cboName", ""))) = cb
        End If
    Next
 
    For Each lbl In Me.Controls.OfType(Of Label)()
        If lbl.Name.Contains("lblNumber") Then
            lblNumber(CInt(lbl.Name.Replace("lblNumber", ""))) = lbl
        End If
    Next
 
End Sub

Now I have the ability to address the controls in the same way that I used to do in VB6. The fact that I lived with this missing feature for about 6 years and just now figuring out a decent way around the problem pretty much guarantees that VS2010 will put the control arrays back in.

EDIT: At the request of a Strong Bad fan who shall remain nameless, I changed up the code above to be a bit more friendly. The previous code only extracted the rightmost 1 character from the name of the control on the design surface, which would not work if you had a control name such as cboName10.

Demo days (CONDG meeting, December 14, 2009)

BP — Tue, 15 Dec 2009 14:52:58 +0000

The Central Ohio .NET Developers Group held their final meeting of the year last night at the Microsoft office in Polaris. Four people gave short demos of Xbox, Zune HD, Windows Mobile, and iPhone, and talked about developing for each platform.

The highlight of the evening was my name being drawn as winning the year’s final and perhaps most craptastic door prize, which I then gave to my coworker who was attending the meeting with me. He is into free t-shirts.

Battleship AI contest on Stack Overflow

BP — Thu, 26 Nov 2009 16:39:27 +0000

Recently there was a contest running on Stack Overflow to design the best Battleship AI. Here is a link to the page:

What is the best Battleship AI?

I must admit that I am still smarting over this contest, as my BP7 contest entry did awesomely well and incredibly poor at the same time. Here is the code:

namespace Battleship
{
    using System;
    using System.Collections.Generic;
    using System.Drawing;
    using System.Linq;
 
    public class BP7 : IBattleshipOpponent
    {
        public string Name { get { return "BP7"; } }
        public Version Version { get { return this.version; } }
 
        Random rand = new Random();
        Version version = new Version(0, 7);
        Size gameSize;
        List<Point> scanShots;
        List<NextShot> nextShots;
        int wins, losses;
        int totalWins = 0;
        int totalLosses = 0;
        int maxWins = 0;
        int maxLosses = 0;
        int matchWins = 0;
        int matchLosses = 0;
 
        public enum Direction { VERTICAL = -1, UNKNOWN = 0, HORIZONTAL = 1 };
        Direction hitDirection, lastShotDirection;
 
        enum ShotResult { UNKNOWN, MISS, HIT };
        ShotResult[,] board;
 
        public struct NextShot
        {
            public Point point;
            public Direction direction;
            public NextShot(Point p, Direction d)
            {
                point = p;
                direction = d;
            }
        }
 
        public struct ScanShot
        {
            public Point point;
            public int openSpaces;
            public ScanShot(Point p, int o)
            {
                point = p;
                openSpaces = o;
            }
        }
 
        public void NewGame(Size size, TimeSpan timeSpan)
        {
            this.gameSize = size;
            scanShots = new List<Point>();
            nextShots = new List<NextShot>();
            fillScanShots();
            hitDirection = Direction.UNKNOWN;
            board = new ShotResult[size.Width, size.Height];
        }
 
        private void fillScanShots()
        {
            int x;
            for (x = 0; x < gameSize.Width - 1; x++)
            {
                scanShots.Add(new Point(x, x));
            }
 
            if (gameSize.Width == 10)
            {
                for (x = 0; x < 3; x++)
                {
                    scanShots.Add(new Point(9 - x, x));
                    scanShots.Add(new Point(x, 9 - x));
                }
            }
        }
 
        public void PlaceShips(System.Collections.ObjectModel.ReadOnlyCollection<Ship> ships)
        {
            foreach (Ship s in ships)
            {
                s.Place(
                    new Point(
                        rand.Next(this.gameSize.Width),
                        rand.Next(this.gameSize.Height)),
                    (ShipOrientation)rand.Next(2));
            }
        }
 
        public Point GetShot()
        {
            Point shot;
 
            if (this.nextShots.Count > 0)
            {
                if (hitDirection != Direction.UNKNOWN)
                {
                    if (hitDirection == Direction.HORIZONTAL)
                    {
                        this.nextShots = this.nextShots.OrderByDescending(x => x.direction).ToList();
                    }
                    else
                    {
                        this.nextShots = this.nextShots.OrderBy(x => x.direction).ToList();
                    }
                }
 
                shot = this.nextShots.First().point;
                lastShotDirection = this.nextShots.First().direction;
                this.nextShots.RemoveAt(0);
                return shot;
            }
 
            List<ScanShot> scanShots = new List<ScanShot>();
            for (int x = 0; x < gameSize.Width; x++)
            {
                for (int y = 0; y < gameSize.Height; y++)
                {
                    if (board[x, y] == ShotResult.UNKNOWN)
                    {
                        scanShots.Add(new ScanShot(new Point(x, y), OpenSpaces(x, y)));
                    }
                }
            }
            scanShots = scanShots.OrderByDescending(x => x.openSpaces).ToList();
            int maxOpenSpaces = scanShots.FirstOrDefault().openSpaces;
 
            List<ScanShot> scanShots2 = new List<ScanShot>();
            scanShots2 = scanShots.Where(x => x.openSpaces == maxOpenSpaces).ToList();
            shot = scanShots2[rand.Next(scanShots2.Count())].point;
 
            return shot;
        }
 
        int OpenSpaces(int x, int y)
        {
            int ctr = 0;
            Point p;
 
            // spaces to the left
            p = new Point(x - 1, y);
            while (p.X >= 0 && board[p.X, p.Y] == ShotResult.UNKNOWN)
            {
                ctr++;
                p.X--;
            }
 
            // spaces to the right
            p = new Point(x + 1, y);
            while (p.X < gameSize.Width && board[p.X, p.Y] == ShotResult.UNKNOWN)
            {
                ctr++;
                p.X++;
            }
 
            // spaces to the top
            p = new Point(x, y - 1);
            while (p.Y >= 0 && board[p.X, p.Y] == ShotResult.UNKNOWN)
            {
                ctr++;
                p.Y--;
            }
 
            // spaces to the bottom
            p = new Point(x, y + 1);
            while (p.Y < gameSize.Height && board[p.X, p.Y] == ShotResult.UNKNOWN)
            {
                ctr++;
                p.Y++;
            }
 
            return ctr;
        }
 
        public void NewMatch(string opponenet)
        {
            wins = 0;
            losses = 0;
        }
 
        public void OpponentShot(Point shot) { }
 
        public void ShotHit(Point shot, bool sunk)
        {
            board[shot.X, shot.Y] = ShotResult.HIT;
 
            if (!sunk)
            {
                hitDirection = lastShotDirection;
                if (shot.X != 0)
                {
                    this.nextShots.Add(new NextShot(new Point(shot.X - 1, shot.Y), Direction.HORIZONTAL));
                }
 
                if (shot.Y != 0)
                {
                    this.nextShots.Add(new NextShot(new Point(shot.X, shot.Y - 1), Direction.VERTICAL));
                }
 
                if (shot.X != this.gameSize.Width - 1)
                {
                    this.nextShots.Add(new NextShot(new Point(shot.X + 1, shot.Y), Direction.HORIZONTAL));
                }
 
                if (shot.Y != this.gameSize.Height - 1)
                {
                    this.nextShots.Add(new NextShot(new Point(shot.X, shot.Y + 1), Direction.VERTICAL));
                }
            }
            else
            {
                hitDirection = Direction.UNKNOWN;
                this.nextShots.Clear();     // so now this works like gangbusters ?!?!?!?!?!?!?!?!?
            }
        }
 
        public void ShotMiss(Point shot)
        {
            board[shot.X, shot.Y] = ShotResult.MISS;
        }
 
        public void GameWon()
        {
            wins++;
        }
 
        public void GameLost()
        {
            losses++;
        }
 
        public void MatchOver()
        {
            if (wins > maxWins)
            {
                maxWins = wins;
            }
 
            if (losses > maxLosses)
            {
                maxLosses = losses;
            }
 
            totalWins += wins;
            totalLosses += losses;
 
            if (wins >= losses)
            {
                matchWins++;
            }
            else
            {
                matchLosses++;
            }
        }
 
        public void FinalStats()
        {
            Console.WriteLine("Games won: " + totalWins.ToString());
            Console.WriteLine("Games lost: " + totalLosses.ToString());
            Console.WriteLine("Game winning percentage: " + (totalWins * 1.0 / (totalWins + totalLosses)).ToString("P"));
            Console.WriteLine("Game losing percentage: " + (totalLosses * 1.0 / (totalWins + totalLosses)).ToString("P"));
            Console.WriteLine();
            Console.WriteLine("Matches won: " + matchWins.ToString());
            Console.WriteLine("Matches lost: " + matchLosses.ToString());
            Console.WriteLine("Match winning percentage: " + (matchWins * 1.0 / (matchWins + matchLosses)).ToString("P"));
            Console.WriteLine("Match losing percentage: " + (matchLosses * 1.0 / (matchWins + matchLosses)).ToString("P"));
            Console.WriteLine("Match games won high: " + maxWins.ToString());
            Console.WriteLine("Match games lost high: " + maxLosses.ToString());
            Console.WriteLine();
        }
    }
}

The thing I find odd about this was that against the winning entry, Dreadnought, my AI was far and away the most successful, winning about 40% of the individual games. The next closest competitor to Dreadnought was BSKiller, crafted by my compatriot in crime, John Boker, winning 20% in the initial round robin and 12% and 14% in the knockout round.

And yet, BP7 stunk against most of the other real submissions, which is a bit mysterious to me. I understand that there is some random fortune involved here (for example, in the round robin, BSKiller defeated BP7 121 games to 80, even though in my own testing, BP7 was winning about 54% of the games over BSKiller), but to be defeated at almost every turn?

Oh well. Here is my VS2008 solution and class files, if you would care to try it out for yourself:

Battleship solution

Also, when I was first looking into this problem, I created some graph paper to help me visualize certain situations. Here is the PDF file of this graph paper:

Battleship Graph Paper

Happy Thanksgiving everyone! (For those outside the U.S., Happy November 26th.)

How to get the version number of a running process

BP — Wed, 25 Nov 2009 01:37:47 +0000

I wanted to have my .NET based Palm OS conduit DLL be able to report the version of the HotSync Manager that the user has installed on their computer. Initially, I was going to try to read the version of the executable, but then I would first have to find the path to the executable, and hope that this would be a reliable enough method.

As it turns out, after I did a little investigation, I found out that it is not necessary to try and figure out where the HotSync Manager is installed by reading the appropriate registry key to get the HotSync Manager location and then trying to get the version number of the assembly at that path. Because the user is in the conduit code, the HotSync Manager (HOTSYNC.EXE) is already in the running processes list. It just so happens that in the System.Diagnostics namespace there is a handy dandy method that gets all of the running processes, along with a goodly amount of information about each process, including the version number.

So here is my VB.NET code that searches for the HotSync Manager process and returns the version number as a string.

Function GetHotSyncVersion() As String
 
    Dim versionString As String = "Unknown"
 
    Dim procList As List(Of Process) = Process.GetProcesses().ToList
    Dim hotSyncProcess As Process = Nothing
    For Each p In procList
        If p.ProcessName.ToUpper = "HOTSYNC" Then
            hotSyncProcess = p
        End If
    Next
 
    If hotSyncProcess IsNot Nothing Then
        versionString = hotSyncProcess.MainModule.FileVersionInfo.FileVersion
    End If
 
    Return versionString
 
End Function

Sorry I missed the CIDUG meeting tonight.

Deuces wild???

BP — Fri, 13 Nov 2009 03:08:17 +0000

As a baseball loving youth, I remember with great fondness watching and listening to baseball as called by the voice of baseball, Vin Scully, who is unquestionably one of the greatest baseball announcers.

One thing I can always remember him saying during his calls was “deuces wild”, which he used to describe a situation that occurs with a count of 2 balls, 2 strikes, and 2 outs.

So, I figured I would take a look at the raw statistics and see how often the deuces wild situation actually came up. Here is the code from my Program.cs file:

using System;
using System.Collections.Generic;
using System.Linq;
 
namespace RetrosheetReader
{
    class Program
    {
        static List<Team> teamList;
        static List<Player> playerList;
        static List<Event> eventList;
 
        const string DATA = "c:\\baseball_data\\";
 
        static void Main(string[] args)
        {
            Console.WriteLine("Retrosheet Reader");
            Console.WriteLine();
 
            teamList = Team.GetTeamList(DATA);
            playerList = Player.GetPlayerList(DATA);
            eventList = Event.GetEventList(DATA);
 
            Console.WriteLine("Number of teams: " + teamList.Count().ToString());
            Console.WriteLine("Number of players: " + playerList.Count().ToString());
            Console.WriteLine("Number of events: " + eventList.Count().ToString());
 
            int[, ,] pitchCount = new int[4, 3, 3];
            int balls, strikes, totalPitches;
 
            totalPitches = 0;
            foreach (var ev in eventList)
            {
                balls = 0;
                strikes = 0;
                foreach (char c in ev.pitchSequence)
                {
                    if (Functions.IsBallOrStrike(c))
                    {
                        pitchCount[balls, strikes, ev.outs]++;
                        totalPitches++;
                        if (Functions.IsStrike(c))
                        {
                            if (strikes == 2)
                            {
                                if (!Functions.IsFoul(c))
                                    strikes++;
                            }
                            else
                                strikes++;
                        }
                        else
                        {
                            balls++;
                        }
                    }
                }
            }
 
            Console.WriteLine("Total pitches: " + totalPitches.ToString());
            for (int o = 0; o < 3; o++)
                for (int s = 0; s < 3; s++)
                    for (int b = 0; b < 4; b++)
                        Console.WriteLine(String.Format("Total pitches on B{0}-S{1}-O{2}: {3,8}  ({4,6:P})", b, s, o, pitchCount[b, s, o],
                                                    pitchCount[b, s, o] * 1.0 / totalPitches));
 
            Console.WriteLine();
            Console.Write("Strike any key to end...");
            Console.ReadKey();
        }
    }
}

By the way, there is a new Functions.cs file in the project that contains utility functions, and I had to modify the Event.cs file to take into account the fact that the BEVENT application creates duplicate records for a batter if there is some kind of on-base event that happens in the middle of the at-bat, such as a stolen base or pick off.

The results? I ran the application with the 2008 season data, and found that there were 700,242 total pitches. The deuces wild situation happened on only 17,141 pitches, or 2.45%. Of course, the highest percentage occurred with 0 balls, 0 strikes, and 0 outs (the first pitch to any batters that bat in an inning before the first out is recorded, including the first batter of each inning) with 65,050 pitches, or 9.29%.

Here is the zipped up solution:

RetrosheetReader.zip